High Performance Cashew Nuts Frying Machine in China

Details of high pereformance cashew nuts frying machine:
1. Equipment material: 304 food grade stainless steel
2. Energy application scope: electric heating pipe, gas heating
3. Frying equipment process introduction:
Frying equipment can be divided into two processes: oil-water mixed type and pure oil filtration type.

Pure oil circulating filtration type has a wide range of uses and significant advantages:
It can be filtered while frying, and the residue can be cleaned at any time. The service life of the working oil can be extended by 10-15 days and the production cost can be reduced.

Features of Oil-water separation cashew nut frying machine:
1. The oil-water separation type fryer adopts the heating method from the middle of the oil layer to control the temperature of the upper and lower oil layers, effectively alleviate the degree of oxidation of the oil, and increase the acid value, thereby extending the life of the oil.

2. This process allows food residues, excess water, and heavy metals generated during the process of frying food to quickly escape from the high temperature area and sink into the low temperature area, which is discharged with water. When the frying oil is excessively dried, the water layer can be supplied for frying Appropriate water content in the oil layer prevents the fried food from coking and charring, which can effectively control the production of carcinogens and ensure the health of consumers.

3.Unique product technology and scientific product structure enable users to save energy.

Email: serena@machinehall.com
Whatsapp/Mobile: +8615515597212

Website:https://www.nutmachines.com/

How are Cashew Nuts Produced in Factory?

At present, cashews nuts in the world are usually produced by two processing methods. Cooking is common in India and southeast Asia, while frying is used in Japan and Europe.

The first method: cooking – How are cashew nuts produced?

It is divided into normal pressure cooking and pressure cooking, pressure cooking is to put cashews into a simple round cooking pot, the steam pressure is 0.2-0.25mpa, cooking time is about 20min, the steamed fruit of each pot is about 300kg, loading and unloading materials are all manual operation, labor intensity, easy to occur industrial accidents.

Characteristics of cooking method:
Cooking method is heated by steam. The expansion coefficient of nut shell and kernel is different when heated. After cooling, nut shell and kernel are separated. The cooking time was different, which had no significant effect on kernel quality.

Cooking method, simple equipment, less investment, easy to grasp the process.

The second method: frying – How are cashew nuts produced?

High degree of automation. Cashews after the complicated cleaning of the equipment shall be placed in a dehumidification tank for three days before frying to ensure that the moisture content of the shell is within the range of 3%-8%. Then, cashews shall be brought into the oil tank with CNSL as the medium with the oil temperature maintained at 190-200℃ for frying for 2-3min.

Characteristics of frying method:

The frying technology is suitable for large-scale mechanized processing, but the equipment is complex, the investment is large, the frying degree is difficult to control, to get the white kernel is more difficult, if the use of centrifugal shell, the kernel is easy to produce pollution, the crushing rate is also high.

Welcome you to know – Cashew Nut Processing Line

Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8615515597212

Soybean Skin Benefits in the Aquaculture Industry

We are the soybean skin peeling machine manufacturer in china, includes dry type soybean peeling machine and wet soybean skin removing machine. The soybean skins are usualy removed in food industry, but in aquaculture industry, the soybean skins have many benefits.

Soybean skins are a by-product of soybean oil processing, accounting for 10% of the total volume of soybean and 8% of the total weight of soybean. Soybean husk is mainly coated by the outer layer of soybean, and its color is beige or light yellow. It is obtained by thermal peeling or crushing and sieving of oil.

Soybean Skin Benefits In the Aquaculture Industry

• Soybean skin contains a lot of crude fibers, which can replace the low-quality straw and hay in the forage of herbivorous animals. Straw has poor palatability, low crude protein content, low mineral content and high lignin content. In the process of drying forage into hay, the nutrient loss due to chemical and mechanical action is more than half, and the utilization rate of herbivores is low. The percentage of NDF, ADF and lignin in soybean peel was 63%, 47% and 1.9%, respectively. The water quality of cellulose is an important factor in the digestion of cellulose in feed. Because of the high crude fiber content of soybean husk and the low lignification degree, soybean husk can replace straw and hay.
• Soybean skin contains adequate protein and energy, which can replace part of the concentrate supplement for ruminants. The crude protein content in soybean husk was 12.2%, higher than that in Maize (10%) and lower than that in wheat bran (17.1%). Therefore, soybean husk can replace a certain amount of corn and wheat bran. Adding soybean husk can also reduce the metabolic diseases of ruminants.
• The addition of cereal energy feed to low-quality crude meal results in acidosis, which affects the digestion of dry matter and crude fibre of feed, due to the large amount of starch in cereal feed, the rapid fermentation of starch in the rumen, the decrease of pH value of rumen juice and the disturbance of microbial flora. Replacing part of cereal feed with soybean peel can not only reduce acidosis caused by high-concentrate diet and form favorable rumen pH value, but also stimulate the rapid growth of microorganisms that decompose fibers in rumen juice and enhance the vitality of degradable fibers.

At present, soybean skins are gradually favored by the farmers in the aquaculture market, and has been favored in the fields of dairy cattle raising and pig raising.

If you want to know more about the soybean skins and machines, welcome you contact us.

Contact Serena:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8615515597212

How to roast almonds in toaster oven?

How to roast almonds in toaster oven?

1.  Preheat the oven and spread the almond out on a baking sheet.

Preheat oven to 350 ° F. Spread the nuts in a single layer on a baking sheet – don’t stack each other. I usually use a cake pan to roast almonds, because the edges are higher, the nuts are poured in, and the tray is gently shaken and spread.

2. Let the almond cover with oil.

If you want to grease the almonds, pour the almonds into a baking pan and spread them in a small amount of fat. Shake the pan to cover the nuts evenly. 100HOW tip: be careful not to add too much at once. Start with about 1 teaspoon or 2 teaspoons, not enough.

3. Roast almonds.

Bake in the toaster oven for 5 minutes.

4. Stir the almonds.

Remove the baking sheet in 5 minutes and stir to allow the edges of the nuts to intersect the middle. If you use the cake pan I’m talking about, all you have to do is shake it. Then put it in the oven again.

5. Check whether it is completed.

It should be examined in about three minutes. See if the color gets darker, if the fragrance begins to bubble, if there is crackling sound… Return to the oven if desired, and check again after 3 minutes. If desired, stir to change the position of the nuts. The average roasted nut is rarely more than 15 minutes, all between 8 and 12 minutes.

6. Let cool after baking.

When the nuts look brown and yellow, they taste strong. You can take them out of the toaster oven and take them out.

Contact Serena:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8615515597212

How to make roasted sunflower seeds?

• How to make roasted sunflower seeds in an oven:

Steps:

1. Take a gauze bag and open it. Put the chopped garlic, Chinese prickly ash and large materials into the cloth bag and tie the mouth of the bag.

2. Wash melon seeds. Put the seeds and dressing bags into the pot, add salt and water, water over the seeds, stir well, make the salt dissolve, soak for 12 hours. Cook for 20 minutes, hold the fire for another 20 minutes, remove the melon seeds, control the dry water.

Put the seeds in a baking sheet at 150 degrees and bake slowly. During frequent turnover, so that uniform heating. Baked melon seeds can be served after they are cooled.

• How to make roasted sunflower seeds in microwave oven:

1. Put the right amount of melon seeds in the microwave oven

Flip once a minute, about 4 to 5 times

3. The final wave can be turned once every half minute after 3 or 4 times, according to the amount of melon seeds

• The method of frying sunflower seeds:

1, prepare a clean iron pan.ds:

2. Spread the original seeds evenly in an iron pot and heat them over medium heat.

3. Add salt and saccharin (a small amount) to a small amount of warm water, and then add the melted salt and saccharin to the water as you cook.

4, then add some zest (fennel is fine).

5. Keep trying. Don’t wait for the taste to stop. It’s too late.

6. If you hear several consecutive blips and blips, continue to fire skillfully, and hear the sound from one to another, then it is already cooked and should be stopped in time. Let it cool and ready to eat.

Contact Serena:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505
Website:http://www.nutmachines.com

How to make roasted peanuts by roasting machine?

Roasted peanuts are crisp and refreshing and nutritious. They are the essential dishes on the table. They are also great choices as a daily snack. Today is a simple way to make five spiced peanuts in the peanut roaster machine.

Ingredients: peanuts, pepper, salt.

The steps of baking five spiced peanuts in the oven:

1, peanuts into the water, add appropriate pepper, salt soak for more than 10 hours;

2. Remove the soaked peanuts and control the water for one day in the ventilating place.

3, the peanuts are padded in the baking dish for 180 minutes for 25 minutes.

Tip: baking time and temperature according to the oven set, repeat several times in the middle.

The peanut oven is easy to install and easy to operate. It is applicable to designated businesses in areas such as residential areas, streets and densely populated areas. Small investments and lucrative profits are ideal choices for laid-off workers, self-employed households and unemployed young entrepreneurs. The roasted peanuts, such as the roasted peanuts, are pure and fragrant. It is the most ideal equipment for speculation in the past.

Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505

Potato Chips Manufacturing Process

We are professional potato chips  production machine manufacturers in China. Following will introduce the potato chips manufacturing process:

Potato → Wash → Peel → Check Trim → Slice → Remove Partial Water → Color Protect Liquid Soak → Rinse → Centrifuge Dehydration → Mix → Spread → Microwave Baking → Seasoning → Packaging → Finished Product

1 Selected materials, cleaning, peeling: potatoes require thin skin, shallow buds, smooth surface, size, such as eggs, the proportion of> 1.6, sugar <2%, to avoid budding, skin shrinkage; wash away the dirt on the potato surface, soil. Manual cleaning or mechanical cleaning can be used; peeling by hand, and using a commercially available steel ball net brush can cleanly remove the potato peel; if the direct use of the knife, slow speed, large loss and high cost. Mechanical peeling: Use a wire brush inside the drum or a hard nylon brush to rub against the potato surface to remove the skin.

2 Check the trimming: After the potatoes are peeled, they should be carefully examined. If there is rot, deterioration, dark spots or buds, etc., before the slicing, use a stainless steel knife to trim. If it is too small or too small, it can be used for other purposes; it is particularly large and then cut into the slicer.

3 Slices: Slicing is a relatively key process. Thickness and evenness are required to ensure consistent baking time, consistent maturity, and consistent color. The thickness of potato slices has a great relationship with oil content and crispness. In our experiments, we found that after thinly sliced ​​potato chips were baked (primed with oil), they were high in oil, transparent in oil, and not crunchy. The thinner the potato chips are, the higher the oil content is. When the tablet thickness exceeds 1.8-2.2 mm, the baked potato chips are crunchy and even in color.

4 remove some of the water: fresh potatoes contain about 85% water, if you can first remove some of the water before baking, you can save energy, shorten the baking time. The method for increasing productivity is to salt the sliced ​​potato chips with 1% salt for 3 to 5 minutes.

If you wnat to know more about the potato chips and machines, just feel free to contact us, we can send you machine price, details and video.
Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505

Website:http://www.machinesplant.com/

Hard Shell Almond Cracker Suppliers

We mainly produce mechanical shelling , hard shell almond cracker, cashew nut shell breaking machine nuts such as almond peeling machine, almond, hazelnut, mainly to peel fruit, almond camellia and other hard shell, reasonable design, low breaking rate, nuclear processing equipment at home and abroad are the best.

There are three main types of almond shell cracking machine produced by our company: XHTK-1 (home) XHTK-2 (a broken shell XHTK-3 (level three), is a broken shell) processing roller, vibration sieve and sieve, wherein XHTK-3 is provided with a hoisting machine automatic feeding, processing and clearance can be adjusted according to the size of apricot in order to improve the rate of broken shell, and the whole kernel rate, XHTK-1 output: 200-300kg/h, -2 300-400kg/h, -3 output: output: 1000-1200kg/h shell breaking rate of 98% in the whole kernel rate is 96%, the product of customers throughout the country, exported to more than 10 countries, the majority of customers is a trusted product.

It has a hard shell, the shell and kernel to leave, the first to use nuclear broken almond peeling machine, and then use the shell and kernel separator, the characteristics of shell and the proportion of different kernels and suspension speed, with the help of airflow through the particle clearance to promote separation between shell and kernel.

Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505

Nuts Butter Grinding Machine for Sale

All contact with the material parts are made of high-quality stainless steel mill for stainless steel nuts butter grinding machine, especially the key dynamic and static disc hardening, therefore, has good corrosion resistance and wear resistance, but if the customer is in operation, accidentally fell into the iron or stone and other hard objects, it will cause the head the damage, so the peanut sauce also belongs to the grinding wheel head machine parts. Usually when customers use the peanut grinding machine to grind, if the material is softer, the grinder of peanut grinding machine can be used for more than 3-5 years, and the grinding head is less damaged.

The working principle of nut grinding machine is to effectively emulsify, disperse and smash the material, so as to achieve the effect of ultrafine and micro grinding. The working principle of the emulsifier is to distribute one phase or many phases into another continuous phase efficiently, quickly and evenly. From the work principle, grinding machine, peanut sauce emulsifying machine has dispersed crushing effect, but the difference between the two from the refinement of it, emulsifying machine than the colloid mill a little better, if the material particles is relatively small, generally Hengdong technology suggest that you use emulsifying machine. Colloid mill material has a high adaptability (such as high viscosity, large particles). So in many cases, peanut grinding machine is used for the front part of emulsifying machine or for high viscosity occasions. When colloidal mill is used for more solid materials, it is often used for refining.

From the application of production, the nut butter grinding machine can not replace the emulsifying machine, both of them have their own advantages and disadvantages, because the refinement effect of peanut grinding machine is weaker than that of the emulsifying machine, but the emulsifier has no colloid mill for material handling with high solid content. So when we choose peanut grinding machine, emulsifier equipment, it is better to refer to our own production materials as the choice.

Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505

Apricot Shell Cracking Machine Design

In order to solve and overcome the shortcomings of previous apricot almond shelling technology, we design an almond shell cracking machine has the advantages of simple structure, easy adjustment, high production efficiency.

The utility model (Figure two) of apricot cracking machine comprises a frame, a driving roller, a driven roller, a motor and a belt driving device, motor and active rollers are mounted on the frame, the belt drive device comprises a drive pulley and the driven pulley, the pulley mounted on the output shaft of the motor shaft, the driven pulley is arranged on the initiative roll end on the drive pulley and the driven pulley are connected together by a triangle belt, which is the passive roller for free roller, through two sets of passive roller spacing adjustment device is arranged on the machine frame, a driving roller through almond to transmit power to the driven roller, reverse differential between two rollers the apricot in rotation, the drive roller and the driven roller friction and extrusion shell.

The spacing adjustment device of almond shell cracking machine comprises a supporting seat, sliding bar, screw, the slider and the hand wheel, bearing two, respectively fixed on the frame, the hand wheel is installed at the end part of the screw, screw and slide bar installed in parallel between the two supporting seat, a slide block arranged on the slide rod and a screw rod, a driven roller installed on the slide block through a bearing seat, the handwheel screw drives the sliding block to move on the slide bar, adjust the spacing between the passive roll and the drive roll, in order to meet the requirement of material processing of different specifications.

If you want to know more about the almond shell cracking machine, just feel free to contact me.

Contact information:
Skype: serenayan666
Email: serena@machinehall.com
Whatsapp/Mobile: +8618595717505